This alloy mast is fitted with rope halyards for main, jib, 2 spinnakers (one @ masthead), with Spinlock jammer for jib (or halyard tails can be switched to use jammer for other halyards).

– trapeze wires fitted but the prime use for these was to stabilise the mast for raising and lowering.

-lazy jacks fitted, easily removed if not required.

– spinnaker-pole topping lift fitted. There is a spinnaker-pole ring fitted.

-masthead burgee halyard fitted which would serve as a boom topping lift.

-attachment at the masthead for a back stay if required.

– Vang attaches to an eye on the mast-base fitting.

– Standing rigging comprises mainstays through swept-back spreaders, lowers and forestay, all with turnbuckles.

-.Mast track can take boltrope or slides
Located in Salamander Bay NSW. Purchaser to arrange freight.No free freight.

Construction (Rig) Extrusion Material Alloy Anodised no Paint no Colour Silver Overall mast length measurement (X) 8440mm Fore & aft section measurement (Y) 115mm Athwartships section measurement (Z) 75mm Wall Thickness 4mm (front) 2mm (sides) Distance from mast step (butt) to deck (datum) n/a Distance from datum to boom vang fitting 10mm Distance from datum to boom gooseneck fitting 520mm Distance from datum to1st spreader 3480mm Distance from datum to 4th spreader Distance from datum to mast head 8440mm Distance from datum to topping lift sheave 5320mm Distance from datum to genoa sheave 6840mm Distance from datum to spin halyard sheave 1) 7290mm 2) 8450mm Distance from datum to main halyard sheave 8450mm Distance from datum to forestay attachment 6880mm Distance from datum to backstay attachment 8450mm Distance from datum to lowers attachment 3380mm Mast track profile 12mm round Distance from datum to spin pole ring 775mm Sheaves scored for wire or rope rope Sheave diameters 50mm (main)